/

RESMED NASAL PILLOW MASK AIRFIT P10

₹4,230.00

ResMed AirFit P10 Nasal Pillow Mask: ₹4230 — ResMed’s quietest and lightest nasal pillow mask, just 3 parts with QuietAir™ venting and minimal-contact split-strap headgear. Genuine product, verified supply chain. All 3 pillow sizes (S/M/L) available.

Need the AirMini-compatible version instead? Compare Standard vs. AirMini P10 ↓

🔄 Genuine ResMed mask, sealed packaging — replace the pillows & headgear periodically for best seal
✓ Genuine Product ✓ Fast Delhi NCR Delivery

Not sure which pillow size or headgear fits you?

💬 Ask on WhatsApp

In stock

In stock

SF87456473-2-3-1-2-1-1-1-1-3-1-1-1-1-1-1-2-1-2-1-1-1-1-1-1-1-1-1-1-1-1-2-1-1-1-3-1-1-2-1-1-1-2-1-3-1-1
Brand:

Description

ResMed AirFit P10 Nasal Pillow Mask: ₹4230 — ResMed’s quietest and lightest nasal pillow mask, built from just 3 parts with QuietAir™ woven-mesh venting and a split-strap headgear that keeps facial contact to a minimum. Compatible with all standard CPAP/BiPAP machines. BYM sources this as a genuine product through a verified supply chain — this is not a grey-market import.

ResMed AirFit P10 Nasal Pillow Mask lifestyle banner, quieter mask for your sleep

ResMed AirFit P10 headgear shown in both blue QuickFit and purple QuickFit for Her colourways

New to nasal pillow masks? Here’s the 60-Second Version

A nasal pillow mask uses two small silicone pillows that sit just inside your nostrils instead of covering your whole nose or face — so there’s less material on your skin and a wide-open field of view. The AirFit P10 takes this further: at roughly 45g and just 3 parts, it’s one of ResMed’s lightest and quietest masks, with a standard front tube connection that works on any CPAP, APAP, or BiPAP machine — not the specialised AirMini-only version.

Who This Mask Is Built For

👃

Minimal-Contact Preference

Just two soft pillows under the nose, not a full cushion — less material touching your face.

🤫

Light & Noise-Sensitive Sleepers

QuietAir venting keeps exhale noise down to around 21 decibels — quieter than a whisper.

🔄

Active & Side Sleepers

Ultra-light flexi-tube and slip-on headgear move with you through the night.

📖

Reading & TV Before Sleep

Open field of view with almost nothing covering your face.

ResMed AirFit P10 (Standard) vs. AirFit P10 for AirMini — Which Should You Choose?

Same nasal pillow design, different machine compatibility — here’s how to pick the right one:

Feature AirFit P10 (Standard) AirFit P10 for AirMini
Compatible machines All standard CPAP/APAP/BiPAP ResMed AirMini only
Humidification Uses your machine’s own humidifier HumidX waterless cartridges included
Best for Home use on any CPAP machine Travel with the AirMini
Cushion Same nasal pillow design Same nasal pillow design

Not sure which version you need? Ask us on WhatsApp — or browse all CPAP & BiPAP masks.

ResMed AirFit P10 Nasal Pillow Mask — Finding Your Pillow Size

ResMed AirFit P10 components diagram showing QuickFit headgear, frame, and pillow sizes XS/S/M/L

The AirFit P10 comes in four pillow sizes — Extra Small, Small, Medium, and Large — with colour-coded, key-clip pillows for fast, left/right-oriented fitting. Headgear is available in blue QuickFit or purple QuickFit for Her, both split-strap and slip-on with no buckles. Message us on WhatsApp if you’re unsure which pillow size or headgear style is right for you.

Key Features

Here’s what’s included at this ResMed AirFit P10 Nasal Pillow Mask price point, feature by feature:

ResMed AirFit P10 features slide — easy to fit, visual freedom, easier to use
ResMed AirFit P10 weight and simplicity infographic — approximately 45g, 3-part design

🤫

QuietAir™ Woven-Mesh Venting

Diffuses exhaled air quietly — around 21 decibels, ResMed’s quietest mask.

🪶

Ultra-Lightweight, Just 3 Parts

Weighs approximately 45g — easy to assemble, fit, and clean.

🔑

Key-Clip Nasal Pillows

Colour-coded sizing with left/right orientation for fast, correct fitting.

🧵

Split-Strap Slip-On Headgear

No buckles or clips — minimal facial contact and quick to put on or remove.

Technical Specifications

Full spec sheet for the ResMed AirFit P10 Nasal Pillow Mask, so you know exactly what you’re ordering:

Brand ResMed
Model AirFit P10 (all devices except AirMini)
Mask Type Nasal pillow CPAP/BiPAP mask
Cushion Material Silicone, dual-wall nasal pillows
Headgear QuickFit (blue) or QuickFit for Her (purple), split-strap, slip-on
Available Sizes  Small, Medium, Large pillows
Weight Approximately 45g
Vent Technology QuietAir™ woven-mesh — approx. 21 dB exhale noise
Compatibility Standard CPAP / APAP / BiPAP machines (not the AirMini)
Country of Origin Singapore & Australia
Importer ResMed India Private Ltd.
Product Type Consumable — pillows & headgear are replaced on a schedule, not covered under warranty

Cleaning & Replacement Schedule

Clean the nasal pillows and frame daily with mild soap and warm water, then rinse and air dry. Wash the headgear the same way and let it fully air dry before use. Worn silicone affects seal quality, so plan on replacing the pillows every few months and the headgear roughly every 6 months, sooner with heavy use. Ask us about a resupply schedule if you’re on a long-term therapy plan.

Compatibility note: This is the standard version of the AirFit P10, compatible with all regular CPAP, APAP, and BiPAP machines. It is not the AirMini-specific version — if you use a ResMed AirMini travel CPAP, you’ll need the dedicated “AirFit P10 for AirMini” setup pack instead (see comparison above). This mask should only be used under a doctor’s prescribed therapy plan.

Frequently Asked Questions

The questions we hear most often about the ResMed AirFit P10 Nasal Pillow Mask, sizing, and compatibility:

What is the ResMed AirFit P10 Nasal Pillow Mask used for?

It’s a nasal pillow CPAP/BiPAP mask that delivers positive airway pressure therapy for obstructive sleep apnea. It’s built to be ResMed’s lightest and quietest mask, with a minimal-contact design and standard tube connection.

Will this mask work with my AirMini travel CPAP?

No — this is the standard version for regular CPAP/APAP/BiPAP machines. For the AirMini, you’ll need the separate AirFit P10 for AirMini setup pack, which has a dedicated connector and HumidX humidification.

How do I know which pillow size to order?

The AirFit P10 comes in four sizes — Extra Small, Small, Medium, and Large — with colour-coded, key-clip pillows for easy left/right fitting.

Is this mask compatible with my CPAP or BiPAP machine?

Yes, it works with standard CPAP, APAP, and BiPAP machines using a standard tube connection.

How often should I clean it and replace parts?

Clean the pillows and frame daily with mild soap and warm water. Replace the pillows and headgear periodically since worn silicone affects seal quality — ask us about a resupply schedule.

Is there a warranty on the mask?

No — masks are a consumable item, not a warrantied product. ResMed recommends replacing the pillows and headgear on a schedule (not waiting for a defect) to keep the seal effective. Ask us about a resupply schedule if you’re on a long-term therapy plan.

Looking for the best ResMed AirFit P10 Nasal Pillow Mask offer? Every mask sold by Book Your MediDevice is a genuine ResMed product sourced through a verified supply chain, with our own delivery and support in Delhi NCR and across India.

Why Buy From Book Your MediDevice

✓ Genuine product, verified supply chain

✓ Sealed, authentic ResMed packaging

✓ Fast delivery across Delhi NCR & India

✓ WhatsApp sizing & fit support

✓ Secure checkout

✓ No Cash on Delivery — prepaid, secure orders only

MEDIDEVICE HEALTHEXPERTS | CIN: U46596DL2023PTC411786 | GSTIN: 07AAQCM6909H1Z0 | UDYAM AADHAR: UDYAM-DL-03-0030242

Additional information

Mask Size

Small, Medium, Large

Reviews

There are no reviews yet.

Be the first to review “RESMED NASAL PILLOW MASK AIRFIT P10”

Your email address will not be published. Required fields are marked *

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
2
    2
    Your Cart
    AirMini F20 setup pack box with tubing, connector and HumidX F20 cartridge
    ₹4,324.00
    BMC F6 Full Face Mask
    BMC F6 Full Face Mask

    In stock

    Qty: 1
    Price: ₹3,885.00
    ₹3,885.00